Sports and FitnessFishing

Catching a sticker in the spring on a float fishing rod. Gear for catching stickers in the spring

Bleaching, this small, but very cautious fish, can be found in almost all Russian reservoirs. But, despite the modest size, because this underwater inhabitant rarely grows more than a hundred grams, fishing is considered, according to professionals, one of the most highly competitive, and therefore interesting. This is explained, first of all, by the fact that this fish is very timid and cautious.

general information

Usually she has to hunt in the upper layers of the water. She is very sensitive to the slightest movements, and therefore should be very "quiet" and thoughtful fishing. Catching the sticker in the spring has its own characteristics, although it is possible to fish this fish in any season. However, for several years, many believed that this catch can not be caught in winter. It was believed that only when dense flocks of this famine after a long winter torpor of fish go to the mouth of the rivers or deep-water bays, begins a very short catching of the stick in the spring from the ice. Nevertheless, today, knowing some subtleties and armed with the right tackle, you can fish it all year round.

Spring fishing time

Those who like catching the sticker in the early spring, should not go to the pond early in the morning. The fact is that this small fish begins to swim to the shore only after the water has warmed up a little. As a rule, catching a sticker in the spring passes only at nine or ten in the morning. Do not count on the biting of this prey unless the pond has warmed up to at least twelve degrees. Lucky in this season, fishing is right after spawning, when even using a normal net can pull a lot of fish in the coastal zone. But before the spawning - at the end of March or the beginning of April - on sunny days the sticker approaches the closest distance to the angler.

Catch-up places

The best sites for fishing stickers in the spring - this is a shallow shallow water. Catching the sticker in spring takes place in such places on a pond where trees or other vegetation will not prevent water from warming up. In addition, experienced anglers pay attention to the fact that the wind was blowing to the shore. So he brings warm water right under his feet to the fisherman, and along with it will come and plenty of prey.

Tackle

For catching the stick in the spring, the rod is best suited. Since this fish has small sizes, it is necessary to select the tackle for it as sensitive and light as possible. The fishing rod should have the easiest test to make it easy to carry out instantaneous cuts, as well as a soft top, so as not to tear off the upper lip by accident. Gear for catching a sticker in the spring should have a five-meter rod, although if the pond has deep places located very close to the shore, then you can choose shorter options.

Mass equipment should be selected as little as possible. The main thing is that she dissonances with the length of the rod. Catching the sticker in the spring passes with a sink of 0.5 or 1 gram in windless weather, and up to two - if there is a strong lateral impulse.
In this case, the float should be loaded as much as possible, so that only a small antenna can be seen from the water, and also that it immediately sinks even with the slightest bite. It is better to take the shape spindle-shaped. The reason for this choice is that catching a sticker in the spring passes mostly near the shore.

Hook and loop

Many fishermen for spring fishing use a fishing line with a diameter of 0.1 millimeters. If you take a less thick option, then the likelihood that it will often be confused will be great. And if you take a fishing line of a larger size, it will not allow you to put a light rig on the fishing rod. When biting is weak, experienced fishermen put a short leash. In this case, its thickness should be less than the diameter of the main line. These characteristics are necessary for the angler to see the bite quickly.

In the question of choosing a hook, many stop on straight hooks and with an elongated forearm. They are considered optimal for the spring catching of the sticker. If, for example, you put hooks with a stinger concave inwards, then in this case it will take more time to remove the fish from the hook. And since catching the stickers in the spring is a tempo, these options will not work.

Nozzle

The most popular bait for this fish is deservedly believed to be gum. His sticker is very fond of, and it is convenient to catch it. For each larva it will be possible to get about a dozen stickers. However, when choosing a sponge, it is necessary to take not too small. Often, the sticker is more attracted by red or yellow color.

When choosing a bait, one should also take into account the fact that it should not only be light, but also contain those elements that "muddy" the water.

If the angler is going to buy it in the store, then you need to take a special type, designed for gluing or catching any small fish found in the upper water layers. Of course, not bad in the capacity of the privates will work and slices of bread, and even a handful of sand.

A good recipe for baiting is the following: the semolina should be mixed with bran in the proportion of one to three, add a little crushed crumb of bread and pour a glass of milk to get the turbidity. With such a pride, there will be an excellent catch in the spring.

For float fishing rod

Today, to fish this fish from March to May at different depths, the rod still has a priority option, which has a "dead" snap. Today, there are already perfect poles of superfast or fast construction with a length of up to five meters, made of composite materials. The presence of an end shock absorber is mandatory. The line should be chosen not thicker than the diameter of 0.1 mm, and the leash - up to ten centimeters. Immediately after the last, successively increasing pellets are placed. They are needed to balance the gear along the entire length of the line. Crushers should slide along it perfectly. Catching the sticker in spring on a float fishing rod, passing at a minimum depth, assumes a very small distance between them and the float, which is loaded in such a way that only the tip can be seen from the water. Even with the slightest biting, he, hiding under the water, becomes a signal for instantaneous cutting. The float must be fixed in two places.

At the same time, the total weight of all rigging depends both on the distance of casting and the depth of the fishing, and on the speed of the current and wind. On a perfectly calm, low-flow pond catching near the surface, when the sticker can easily be lured to the shore with bread or sand, it is assumed that the shortest rod is used, preferably with a cork handle.

After casting, it is important that the line between the float and the tip of the rod is in constant tension. Only in this case it will be possible to do a quick cut. A call should wait no longer than fifteen seconds. And if it's not there, you need to pull the float a little to the side in a short pull to provoke the prey. If the sticker is not tempted, and in this case, then you just need to transfer the nozzle to another place.

On the spinning

The springing of this little fish has long turned into a favorite pastime of those who, after a long winter, waited for the moment when it will be possible to "charge" the equipment and go on a weekend to the pond. Catching the sticker, actively going straight into the hands, for many has become a real sporting holiday. They not only feed her on a float fishing rod, but also on a spinning rod. When choosing it, it is better to stop on an ultralight rod, equipped with a thin fishing line and a thin coil.

For long casting, spinners of medium or fast construction are convenient. As bait, you can use small wobblers or mini-lures. Sometimes anglers take fly-fishing patterns with baits that are processed with flavors.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.delachieve.com. Theme powered by WordPress.