Cardigan from thick yarn knitting: clothing for all occasions

Probably, every knitter, regardless of skill and experience, simply adores knitting cardigans from thick yarn with knitting needles. No wonder, after all, working with such material, you can get a finished product in just one day!

What yarn is called thick

Traditionally, for knitting use threads of medium thickness: from 200 to 400 meters per 100 grams. This yarn is optimal for making the majority of garments: hats, scarves, blouses, dresses and everything else.

It is convenient for the wizard and for the one who will wear the product. In addition, such materials allow you to save, because the thinner the thread, the more it is in the skein. Therefore, you will need to buy less skeins.

However, there is such a thick yarn that its appearance is more like a cord or even a twine. Due to the thickness of these yarns are quite heavy, so in an ordinary 100-gram skein they can be very small. For example, 100 m, 80 m or even 50 m.

Tool selection

Of course, to tie a cardigan out of thick yarn with knitting needles, you will need a tool. It is very important not to make a mistake with the diameter, because using too thin knitting needles will result in a hard, rough and "wooden" canvas.

It looks quite unattractive, and it's difficult to wear such a creation.

Much better looks soft, beautiful and warm cardigan made of thick yarn, knitting needles (photos clearly demonstrate this principle) tied. To get a loose knitting, they should be at a size or even two more than the recommended ones (usually yarn manufacturers indicate on the label the number of the tool).

Cardigan from thick yarn knitting: the simplest model

The use of a thick thread has its own specifics, which must be taken into account even before the work begins, at the planning stage. First of all, you need to understand that the loops and rows will be very small (therefore, the growth of the canvas and occurs so quickly).

In addition, the loops will be very large, so that all the cuts and seams will be visible as in the palm of your hand. Experienced skilled workers recommend to abandon the fit and complex silhouettes. Cardigans of thick yarn knitting is best knit with minimal difficulty. There are many interesting models that meet these requirements.

For example, the one shown in the following diagram.

This long cardigan without sleeves may well be called a waistcoat. If desired, you can attach the sleeves to it and sew it in the right place.

The following pattern illustrates an even simpler model.

In fact, this is a rectangle with sleeves. It can be done in any convenient way: along or across. It will be appropriate melange yarn sectional dyeing, or decorated with booklets, paillettes and other decorative elements.

Those craftsmen who prefer fancy styles can use the pattern below.

Such cardigan from thick yarn knitting need to knit from a thread of medium thickness (about 150 m / 100 grams).

How to sew the sleeves unnoticeably

If you act in the usual way, that is, close the hinges for the armhole and the pellet of the sleeve, you can find that the seams look simply monstrous. In addition, this leads to a rather large and completely unnecessary consumption of yarn.

A cardigan made of thick yarn with knitting needles should be bound with a solid cloth. To do this, use two methods:

1. The hinges are not closed, but transferred to a thread and then the separately connected parts are joined by a knitted suture.
2. Loops of the armhole are left open. They are returned to them after the details of the gear and the back are ready: they are used as the first row of the sleeve. That is, the work does not move from the cuff to the shoulder, but vice versa.

The order of knitting a universal cardigan

The following model is extremely practical: it is easy to tie and easy to carry.

First of all, you need to run a control sample to calculate the product. For example, 10 loops per 10 cm are obtained. Hence, for the beginning of knitting a shelf with a width of 30 cm, 32 loops (two on the edge) should be typed.

It is interesting that the developers propose to carry out the bar and collar in parallel with the manufacture of the transmission part. How to do it:

1. Dial 32 loops. Of these, 5 pieces should be taken to the bar and carry out garter stitching. The rest of the knit with the chosen pattern.
2. As such, there is no such thing, so you just need to create a rectangular canvas. Its height will be equal to the length of the product from the shoulder to the bottom line.
3. The hinges for the shoulder should be transferred to the auxiliary spoke or to the thread.
4. Work with the remaining strap hinges. To get a collar of the right shape, you need to apply the technique of shortened rows. Every third front row is knitted only up to half. Then turn the canvas (leaving the second part unbroken) and execute the underside.
5. The next two facial rows (together with the four purlins) are knotted completely.
6. Repeat the sequence until the end of the collar.

In the same way, but in the mirror image, perform the second shelf. The back is a rectangle with a notch for sewing a collar. Then the sleeves are knit: they have the form of trapezoids.

At the final stage, you should collect a cardigan from thick yarn with knitting needles. With the description given above, it's pretty easy. Difficulties can arise only when working with the collar.

How to sew a shawl

The two ends of the collar, which are continuations of the strips, need to be sewn with a knitted seam "loop in a loop".

To connect the details associated with thick yarn, you need to pick a thin thread of the appropriate color. Filling it in a large needle (it is better to purchase a special plastic, with a blunt end), you should carefully attach the collar to the neck of the back. It must be ensured that the seam is not too massive and rough.

The result is a knitted cardigan made of thick yarn with knitting needles. With the description of the stages and the drawings of the patterns given in this article, even a novice will be easy to work with.