Black dress with white collar and cuffs: ideas of styles, the basis of patterning

The classic style of clothes will never be obsolete! The veracity of such a bold expression is confirmed by decades. The fashion and ideals of beauty are changeable, however, the classical style always remains relevant. It changes only small nuances in accordance with new trends and ideas of famous designers. A black dress with a white collar and cuffs refers to such things that never go out of fashion. Depending on the cut and the chosen fabric, the attire can be both office and evening. The combination of black and white is one of the most successful. Such a dress will never lose its relevance. That's why it's worth sewing yourself a similar thing, in which it's easy to combine elegance and refined style with comfort.

Basic moments

The pattern on which you can sew a black dress with a white collar and cuffs is quite simple in construction, so even a beginner can cope with a similar task. The main thing is just to correctly take the measurements from the figure and transfer them to the drawing. However, first you need to learn a bit of theory and consider the variations of the styles to have a complete understanding of the types of work used to create things and their sequence.

Variants of styles

What can be a black dress with a white collar and cuffs? The model can be an everyday option for work or a playful dress with an airy skirt and romantic lace trim. In addition, the apparel can become a truly rich outfit of chic material, if it has cuffs and a collar embroidered with white pearls. About how you can decorate a black dress with a white collar and cuffs, you can fantasize for a long time, but it is more correct to proceed from the desired result, that is, to rely on the image presented.

Recently, a very popular skirt-tulip. Such a low will perfectly fit into a strict office attire with a tight top. If, on the contrary, you want to make wide sleeves, for example, from flying silk or chiffon, then dress is better to cut the fitted, and the cuffs to decorate in the form of a bar.

Dress with a collar and cuffs for an evening image can be with an open back with interlacing on a cut by white strips-macaroni. The collar in this garment is often made in the form of a slat along the edge of the deep decollete and runs off to the waist line in the center or on the side. Cuffs in this case can be made with sharp corners, turning away on a tight-fitting sleeve from a thin mesh. Here the restriction can be established only by one's own imagination, because there are simply a huge number of styles!

Fabric selection

The choice of material for the dress depends on the model and the season. It can be knitted fabrics: jersey, angora, diving or gypsy based, staple, silk and chiffon. In addition, do not forget that in the product you can combine different canvases. For example, for a model with a tulip skirt for the bottom, brocade or any other fabric that holds the shape well, and for a tight bodice, it is better to give preference to jersey. For the collar and cuffs, absolutely any material can be chosen: from lace to dense diving. Dress with a white collar and cuffs can also be made by defining the boundaries of contrasting decoration with sewn white stones. In this case, white material is not needed at all.

Removing measurements

After the style and material type is selected, the most interesting process begins - creating a template. First, you will need to take measurements from the figure: neck, chest, waist, hips, length from shoulder to waist on the back and front, chest height, length of the finished product, width of the shoulder and back, sleeve length, chest solution.

Building a Pattern

All the values should be written on the sheet and then transferred to the drawing. Its base is a rectangle with sides equal to the girth of the chest and the length of the product. If the model with a cut-off bottom, then you need to take only the height of the bodice. In accordance with the measure, indicating the height of the bust, you need to make an additional horizontal. This will be the line of the chest, from which the armhole and the dart are built. In the upper corners, one-fourth of the measure of the neck circumference should be postponed, and the width of the shoulder with a slope of 1.5 cm down should be indicated from the points obtained.

On the chest line from the back side, put ½ its width. Next, determine the zone of the armhole: the half-chest of the chest divided into 4 parts and add a couple of centimeters. On the side of the shelf, transfer ½ part of the breast solution and raise the perpendicular from the obtained point. On the shoulder line, postpone 3-4 cm and extend the shoulder seam at this distance, and from the point lower the second border of the thoracic dart.

Next, it remains to determine the lateral seam and thawed tucks. To do this, first find a line of hips (below the waist at 20-22 cm). From the outer edges of the rectangle, set the ½ value of the girth and place a straight line from the middle point of the armhole zone. Thaw darts are determined according to the difference in girths, so that the article will fit well on the figure. After the base is built, it remains only to carve out and assemble by parts a black dress with a white collar and cuffs. The pattern of finishing elements can be painted directly on the shelves, and after transferred to the fabric. It should be noted that you will have to cut two parts for each element so that they are two-sided.

Sleeve construction

How to sew a black dress with a sleeve? Naturally, you need to pattern this element. It is easy to build on the basis of the bodice pattern, combining the shoulder seams and outlining the circumference of the pellet, which will need to be closed in a smooth circle, after lifting the top of the detail by 1.5 cm. Then straight line is laid along the bottom of the circle. It marks the width of the top of the hand and delineates the rounds. The bottom of the sleeve is lowered to the very bottom, narrowing them in accordance with the circumference of the wrist.

Of course, it may seem that sewing a dress with a collar and cuffs is an impossible task. However, in fact, everything is not so difficult! The main thing is to have a desire and then everything will turn out all right!