Bed-polutorka: the sizes. Bed-polutorka: standard

We all sleep on something. In a one-room apartment, a sofa is often used for this purpose. But if you have a bedroom, then it is necessary to have a bed. It should not only be combined in color and style with the decoration of the room.

The bed is a lorry. Dimensions

All beds are divided into single, one and a half and double. The width of 80-100 cm are single.

The standard size of a bed-lorry is 120 cm wide with a length of 190 cm. Although it can usually have a width of 110-150 cm. The width of a double bed is 160-220 cm. In length it can be from 185 cm to 2 meters. One-bedroom occupies little space, but two can not sleep on it. In this case, you can take a double. But it takes up too much space. A comfortable option can be a one and a half bed. It is easy to fit two, and you can fill the space saved by a nightstand, a closet or other furniture.

What the bed consists of

Having decided the issue with the choice of size, you need to consider the design of the bed. Learn at what points you need to pay special attention. Bed-polutorka consists of a frame with legs and frames.

Usually the frame has:

• Backrest (headboard);
• Side panels (kargi).

The headboard can be:

• Stationary (bearing element);
• Attached;
• Hinged (decorative).

More often used stationary and hinged. A bed with such a headboard can be placed anywhere, for example in the middle of the room. Attached headboards are hung on the wall and are usually supplemented with shelves, bedside tables, tables.

The back can be one or two. There is a bed without a backrest. Depending on the number of backs, the king can be from two to four. They are usually made of wood or chipboard and give strength to the product.

Bed frame

From the quality of the frame depends on whether there will be a comfortable bed-polutorka. Frame dimensions depend on the frame parameters.

It is made of long boards, plywood slabs or metal pipes. The plywood will be the least convenient. It is quite solid. In the more expensive models, the frame can be orthopedic. It is divided in length by an additional metal joint, to which beech lamellas (connecting curved bars) or logs of about 5 cm in width are attached. In expensive models, the lamellas have rubber-plastic holders that improve the depreciation.

The more slats, the higher the orthopedic effect. This design does not sag, since it is designed for six legs, two of which are located on the longitudinal joint. The frame can be equipped with a lifting mechanism to change the angle of inclination of the head, legs or the whole body.

In furniture stores, the orthopedic frame can be bought separately. Supplement can be a box for linen, a mattress complete with an orthopedic base under it.

When choosing a bed, you need to consider:

• Height of the frame;
• Material from which it is made;
• The strength of the kings;
• mattress;
• Legs.

Determining the height of the carcass

Choosing a so important part of the interior, take into account the style of the room, their ideas about convenience and beauty. But will your bed-lorry be comfortable? Dimensions, especially the height of the frame, directly depend on the age, state of health of the owner. There is a rule, the first part of which says: the older the person, the higher the bed. But up to a certain limit. If it reaches 80 cm, it will be difficult for an elderly or sick person to get off it. Especially if he has heart problems.

The bed frame can be:

• Low (20-30 cm);
• Average (50 cm);
• High (80-90 cm).

Low beds are suitable for healthy young people. If you decide to make a bedroom in the oriental style, then this bed will not only decorate it, but it will be convenient for you.

The frame of medium height is suitable for almost everyone. The average (European) is calculated so that, sitting on it, you rest your feet on the floor. This bed-polutorka size (photo) has one that it is convenient to sit down on it, it is easy to get up from it.

The frame, whose height reaches 80 cm, is preferred by Americans. The feet can be adjusted, which allows you to set the desired height. Or adjust on an uneven floor. The metal is provided with plastic plugs in order not to scratch the floor.

Materials

The bed frame can be made of chipboard, wood, metal, plastic. The cheapest, but fragile material is wood chipboard (chipboard). These beds are inexpensive, but not very durable. Details can separate, and the body can loosen. Vapors of lacquers and glues used in the manufacture of chipboard can cause an allergic reaction. Nevertheless, such a bed-polutorka can last ten years, or even more. Veneer and MDF are slightly more expensive and more quality.

The frame is solid wood, eco-friendly. Made of veneer or solid wood. The best types of wood are oak, ash, beech. Can be made from rare varieties, for example mahogany, hevea. They can not be influenced by moisture, mechanical influences. These beds are quite expensive. But they will serve for many years. The original will be wicker beds made of rattan, cane and straw.

Metal frames are the strongest. No wonder they were in vogue in the middle of the last century. Now again in demand. The price for them is also high. The metal parts are covered with a special polymer powder. It is resistant to mechanical damage and protects the structural elements from rust. Decorate with forged patterns and knobs.

Mattress

Like the frame, it determines, so comfortable bed-polutorka. The size of the mattress should match its parameters. If it is less, it will move out of bed. If large, then shrink, and it will be inconvenient to sleep. It is better to take an orthopedic mattress.

Design

Styles: classic and modern (avant-garde, high-tech, techno). There are Japanese and country. In the finishing of beds, various upholstery materials, leather, and eco-leather are used. The lifting mechanism provides access to the drawer. It turns out something in between the sofa and the bed.

Often beds are equipped with a lifting mechanism, allowing access to the built-in drawer. Designers constantly develop new interesting models of beds: with canopies, beds-transformers. The basis for them was a bed-polutorka. Dimensions, standard are preserved, but complemented by original design elements. Some models are decorated with LED lighting. Among this variety, everyone can choose their own bed.