Baxi ECO Four 24 F: specifications and reviews

Boiler brand Baxi ECO Four 24 F is a fourth-generation equipment with a compact size, which is why it is so popular today among consumers who want to equip a private house with a hot water system and use hot water. Due to the fact that the unit is designed for installation on a wall, it does not take up much space, moreover, the space below it can also be used. The device has a closed combustion chamber and separate heat exchangers.

The unit is intended for heating of premises, the area of which can reach 240 m ² . Among other things, this equipment can be used to provide a home with hot water at a temperature of 25 °, which will be supplied in the volume of 13.7 liters per minute. For ease of operation, the boiler is equipped with a liquid crystal display, to which data is output, allowing you to monitor the parameters of the device. Among other things, using this interactive you can get information about the failures and errors that have occurred. According to users who have been using such devices for years, such an addition can be called very convenient, since only a professional can cope without a display with troubleshooting.

Specifications

Baxi ECO Four 24 F has a minimum useful power of 9.3 kilowatts, while the maximum possible net power is 24 kilowatts. The efficiency of the device is 91.2%. You may be interested in the maximum consumption of natural and liquefied gas. In the first case, this value is limited to 2.78 m ³ / h, whereas in the second case it is equal to 2.04 kg / h. The device has an expansion tank of 6 liters, and the diameter of the chimney is 120 mm. The device operates on a 220 V network, but the power consumption is 80 watts. The equipment operates quietly enough, the noise level is 29 dB.

Features of heating and hot water supply

Baxi ECO Four 24 F has two heat exchangers, which are separate. One of them is made of copper, while the other is made of stainless steel. The system can maintain the maximum possible pressure of 3 bar. The device is equipped with a Grundfos circulation pump , among other things, the user can use antifreeze during operation. The heated volume reaches 672 m ³ . The minimum and maximum temperatures can be maintained in the heating system, this range varies from 35 to 85 °. Baxi ECO Four 24 F can heat hot water up to a maximum of 60 °, but the lowest value of the hot water temperature is 35 °. At a temperature ranging from 25 to 35 °, the performance of the hot water system will remain unchanged, it was mentioned above and is 13.7 liters. It is noteworthy that this equipment can work in summer mode.

Weight, dimensions and connection features

Before buying this model, you should ask what size it has. Thus, the height, width and depth of the device are 730 x 400 x 299 mm. The weight of the device is 29 kg. To connect the system you need to know about the diameters of the inlet and outlet of cold and hot water. They are limited to 0.5 inches, while the diameter is 15 mm. The flow direction of the heating circuit is connected using a 3/4 inch pipe, which is 20 mm in diameter. The reverse direction of the heating circuit is characterized by the same parameters as the gas supply.

Characteristics of the gas and hydraulic system

Baxi ECO Four 24 F, the characteristics of which are presented in the article and will allow you to determine the choice of a certain model, different features of the gas and hydraulic system. If we consider the first of these, then we can note that there is a modulation of the flame, as the material of the dissector is stainless steel. The gas system is adapted and is capable of operating at a fuel pressure of 5 mbar. If there is a special kit, the boiler can be converted to work on liquefied gas. As for the hydraulic system, it has heat exchangers, one of which is made of stainless steel and is intended for the hot water circuit. But the copper heat exchanger is used for the heating circuit. Inside, a three-way valve made of brass is installed. Among other things, a filter is installed at the outlet to the hot water circuit. Circulating energy-saving pump operates at high speeds. If necessary, you can connect an external storage boiler to the hydraulic system, as well as a solar collector. There is an autobaypass in the device, as well as a pressure gauge, which is the postcirculation of the pump.

Characteristics of temperature control

Boiler wall Baxi ECO Four 24 F allows you to adjust the temperature in two levels, in the heating system, this limit can vary from 30 to 85 °, whereas for the regime of warm floors, the parameters vary from 30 to 45 °. Inside there is weather-compensated built-in automation, in addition, the user has the opportunity to connect an outside temperature sensor. In the heating and hot water circuits, you can automatically control the temperature, as well as adjust it. Temperature control provides timely information about the temperature in the hot water supply system and heating circuits. The user can connect a room thermostat and a programmable timer.

Characteristics of control and safety device

Baxi ECO Four 24 F, reviews about which only the most positive, has a self-diagnosis system, as well as ionization control of the flame. The equipment signals when stopping when connecting to the controller's console. You can take advantage of the protection function from blocking pumping equipment, and the switching period is 24 hours. The primary heat exchanger contains a safety thermostat, but the pressure switch in the heating system is necessary for the signal to be supplied when there is insufficient water pressure.

Reviews about the model

Gas boiler Baxi ECO Four 24 F has many positive features, which is agreed by most consumers. From their feedback you can find out that this equipment belongs to the average price category. The advantages are the presence of two separate heat exchangers, as well as the fact that the interior of the structure is made of metal. It could be considered a minus if composites were used as a material. As practice shows, equipment is characterized by not too high gas consumption, and now the model is fully adapted to Russian conditions. Some buyers argue that this version of the boiler has some drawbacks, which are expressed in the periodic disconnection of the model without a reason. Among other things, the display constantly displays information about the accident. Before purchasing, you should read the instructions, since without special knowledge you constantly have to restart the boiler when it is turned off.

Instructions for use

Baxi ECO Four 24 F, the instruction for use of which must be studied by you after the purchase of goods, is connected only after preparation for installation. To do this, you need to check that the boiler is set to work with a certain type of gas. A sufficient draft should be provided in the chimney, there should not be any constrictions in it. If the chimney flue is connected to an existing chimney, check that the chimney is cleaned, because when the boiler is operating, soot particles can disconnect from the chimney walls and block the output of the combustion products, creating a dangerous situation. The Baxi ECO Four 24 F boiler must be operated with the correct water parameters. Its rigidity should not exceed a value of 20º F, otherwise a polyphosphate dispenser must be installed. As an alternative solution, water softening systems are used that comply with the regulations.