Adjusting disc brakes on a bicycle: the features of the process

A bicycle is a very useful and interesting mode of transport. However, it must serve properly, otherwise injury can not be avoided. Brakes are one of the most important parts of a bicycle. They can be different, but absolutely everything should work without failures. Your health depends on it, and sometimes life. Setting the disc brakes on a bicycle is not a difficult process. But you need to do everything as accurately as possible.

It should be noted that the disk system is mechanical and hydraulic. The principle of adjusting these two types of brakes is similar, but there are small nuances. So, the setting is done with the keys. In the process involved parts of the system: the pads that provide stopping the wheel, caliper, well, the drive itself.

Adjust the disc brakes on the bike is as follows. First you need to examine the system and find out why it works inefficiently. If necessary, you need to purchase new parts or replace the brakes completely. If the wheel was removed, then you need to install it back, while tightening the axis. The caliper is mounted on a special adapter. Do not tighten the bolts too much. The fact is that the caliper needs to be adjusted relative to the rotor. It should stand exactly, so that the pads lie on the disk with the whole area, and not at an angle.

Further adjustment of disc brakes on a bicycle is easy. The wheel is leveled so that in the fork it stands strictly perpendicular. Otherwise, during the ride you will hear his friction against the pads. During the intermediate setting, the caliper must "float". Now pay attention to the inner shoe. It should stand as accurately as possible, that is, so that its cavity coincides with the rotor.

Now setting the disc brakes on the bike involves checking the position of the discs relative to the rotor. To do this, you need to fix the pads and scroll the wheel. The clearance between these parts must be the same. At this stage, the exact position of the shoe is adjusted.

Now the adjustment of the disc brakes on the bicycle is carried out using a cable and a handle. That is, it is necessary to try pressing the lever mounted on the handlebar. In this case, the rotor moves slightly to the inner block, and the clamping piece must clamp the disc. If there are difficulties, then the caliper needs to be adjusted with the help of clamping bolts. If everything is in order, then the brake cable can be attached to the handle.

Now try to ride a bike. If the pads are rubbed without need, then you need to twist the adjustment on the handle a little. Although adjusting the disc brakes of a bicycle in this way can damage its thread. It is better to twist the cable in the caliper itself. If the rotor rubs even after adjusting in all possible ways, then look if it is not a curve. In this case, you have to shoot it and align it. In principle, it is not so difficult to produce the indicated procedure, but if you have never done this, then ask someone from your acquaintance who already knows how to set up the brakes to show you the entire procedure from start to finish.