Do not want to wear old jeans, but the hand can not rise to throw them away? Then try to change them a little. To do this you will need a small pair of scissors or a raspberry, a thread, a sewing machine, a chalk for marking the fabric and knowledge of how to make jeans from breeches.
First, select the pants you will experiment with. Choose them taking into account two points: they should look decent and be whole above the knees, but in case of failure you can easily say goodbye to them. Of course, given the cost of new bridges, it is sometimes cheaper to buy stylish jeans and reshape them the way you like. If you were able to choose the right model from your wardrobe, then you can proceed with the alteration.
Well, iron your jeans and mark at a suitable distance the place of cutting the fabric. Bear in mind that you will still be sewn on the breeches and possibly bend, so do not rush to shorten the legs, even if you are sure you know how to make breeches from jeans. It is better to try on them, tuck them to the desired length, only then proceed to pruning. Do not try to save time on the installation of labels: in order for the resulting legs to be the same length, draw a line from both the outside and the inside.
Another nuance that needs to be considered when figuring out how to make jeans from breeches is the style of the chosen trousers. If you took a model flared at the bottom, then you have to unpack and re-make the trousers. In order to come out beautiful shorts, there should be an angle of 90 degrees between the side seams and the bottom. This applies to both elongated and short models, otherwise they will not look. If flared pants have to be sutured, then narrow, on the contrary, slightly widen. The main thing is that the jeans prepared for trimming become flat.
If you have already conducted all the necessary measurements, noted and rechecked the places of tissue cutting, you can remove all unnecessary. Do not forget to separate the line with the line that will bend: it should be about 5 cm from the bottom of the product, taking into account the need to tuck the fabric. Try on this option again. Only after this, if you are sure that you have figured out how to make breeches from jeans, proceed to sewing.
If you have side seams already in good order, then process the bottom cut: it must be bent, stitching at a distance of about 0.5 cm from the edge of the fold and repeat the line at the very bottom of the product. After that you can make a gate and fix it in a separate line. The highest aerobatics will be the decoration of the bottom bridge knitted inserts, which can be duplicated and on the pockets. And so that no one knows your old pants, you can add a few decorative stitches on them, make simple embroidery. With decorative finishing, special attention should be paid to the threads: they must match the color and texture with those that were sewn with jeans.
If you started with the most simple and unnecessary pants in the house, and the result pleased you, then do not be afraid to experiment. You can try fashionable men's jeans to make breeches.