We make original covers for the tablet with our own hands

Bought in the store a case for a tablet - what can be more boring? Original, such as no one will ever see, tablet cases made with their own hands, cause warm feelings and joy of possession. If you are overwhelmed with the same emotions, you are exactly at the address. Worried that you never made a case for a tablet with your own hands? Do not worry, it's easy to learn!

Step 1

Since mobile devices are different for everyone, not only in terms of model, but also in size, then there will be different covers for the tablet. Measure the length, width and height of your highly intelligent mechanism with your own hands. Record the received data.

Find a very tight cardboard, such as hard covers of books. Instead, you can use the chipboard. Cut out five parts from the prepared material, as shown on the sample:

In our case, their size corresponds to such parameters:

• 20x15 cm;
• 20х1 cm;
• 20x16.5 cm;
• 20х1 cm;
• 20x7, 5 cm;

Notice that the two largest parts are not the same. One little more than the other! This is necessary for the natural girth of the tablet cover.

Step 2

This step of step-by-step instructions on how to make a case for a tablet with your own hands is the most exciting. After all, picking up the fabric for the future cover means expressing your self, your own personality, character and preferences.

So, the choice is made. Open from the material three rectangles, one of which should correspond to the height of the cardboard blank, and its length will be the width of all the hard parts together. The second flap should equal the size of the first three carton rectangles. The third cut - the size of the remaining two cards. Do not forget to add one to two centimeters to the seams.

Step 3

Another important component is the elastic band:

Step 4

Sew to the corners of the smallest rectangle of fabric cuts of elastic tape:

Step 5

Fold the resulting part with a medium-sized rectangle with the inside faces:

Sew the parts. Here's what you should get:

Step 6

Pin the side of the future boot with pins:

Place the elastic band between the elements at the level of fixing the corners:

Step 7

Stretch the future cover from three sides:

Step 8

Turn the cover over the face. On the one hand, there should be a "set" of elastic corners:

... on the other - a rubber band for the entire height of the boot:

Step 9

Insert a cardboard rectangle inside the cover. Fix the part with the machine stitch:

Insert the other cardboard parts one by one, fixing each in its place with a seam.

Step 10

As a result, when all the details take their permanent position, there will be two centimeters of free tissue left:

Fold the remainder neatly inside the case:

Slip stitches side:

Update is ready!

Attach the cover to the tablet with your own hands:

Would you like to read the news? Fold it like this:

Watch the movie conveniently in this position:

It's not difficult to make covers for a tablet with your own hands. Maybe you should think about making unique folders for notebooks and papers? The principle of operation is the same.