The best data collection terminal. How to choose a data collection terminal

Data collection terminals are portable devices that can quickly read information from a product. Most often they are used in shops, industrial enterprises and warehouses. When you receive new products or inventories, terminals are irreplaceable. There are a lot of manufacturers on the market, so choosing a good model is difficult.

How to choose a terminal?

If you look at the universal data collection terminal, then the reading speed should be at least 70 scans per second. It is also important to pay attention to the functional part of the model. In particular, it should include a sound alert option. Some models adjust the volume and font of the text. The processors are set to a different frequency. When processing a large amount of information, it is important to remember the amount of memory. On average, this parameter fluctuates around 4.5 MB.

If you select a device for a large store, the type of codes that are supported is taken into account first. In this case, much depends on the manufacturer. Batteries for powering the device are installed in the main lithium type. The average capacity does not exceed 500 mAh. The minimum permissible temperature for the terminals is -13 degrees. Compact models on the market weigh in the region of 250 g. To get a high-quality data collection terminal for a warehouse with a monochrome display, the user is able at a price of 40 thousand rubles.

Low-precision scanning devices

Low-precision scanning terminals are not suitable for large stores. Many models are equipped with processors for 32 bits. On average, the device's memory does not exceed 4.2 MB. Many models are made without speakers. The width of the beam in this case can not be adjusted. The reading speed is no more than 50 scans per second. Bar codes can be read at distances up to 30 mm.

It is also important to note that the minimum permissible temperature for data collection devices is not lower than -15 degrees. Models with IP20 protection system are afraid of high humidity. It is worth in our time a data collection terminal of this type in the region of 30 thousand rubles.

High-precision scanning terminals

High-precision data acquisition devices are well suited for large inventory in an enterprise. In this case, models are able to boast a high speed of reading information. Some terminals are made with connectors for connection to personal computers. Directly the scanners are of a laser type, with the possibility of changing the width of the active field. The display system depends on the manufacturer. There are high-quality data acquisition devices with high scanning accuracy in the area of 55,200 rubles.

Terminal "Symbol"

For the 1C database, the Simbol data collection terminal is manufactured with a powerful processor. It is also important to mention that there are 4.5 Mb of memory in it. The maximum resolution the user is able to set at 340 to 230 pixels. If necessary, the font color on the display can be changed. The minimum reading distance is 10 mm. The display is set to monochrome, and the text on it can be seen quite clearly.

If we talk about shortcomings, it is important to mention the low capacity of the battery. The maximum scanning width is 300 mm. The interface for data management is provided for the "Bluetooth 1.2" series. The maximum permissible temperature for the data acquisition device is 40 degrees. In terms of dimensions, the terminal is rather compact and weighs only 236 g. The hull from the falls is absolutely not protected. It is also important to note that he is afraid of high humidity. The kit includes a battery and a data collection terminal itself. The instruction is also attached to it. It is worth the device on the market about 43 thousand rubles.

Description of the device "Casio"

This TSD (data collection terminal) is compact and versatile. For warehouses and inventory, the model is used quite often. At large enterprises the device is also valued for a reliable protection system. The display is installed at an acceptable resolution, and the information on it is clearly visible. If necessary, you can change the font color. The system is capable of processing E8 codes, as well as E128. The minimum permissible temperature of this device for data collection is -14 degrees.

In total, there are two lithium-ion batteries. The scanner in this case is at an angle of 25 degrees, so it's very convenient to use the device. The interface for data management is used by the standard series "Bluetooth 1.2". The function of sound notification during scanning at the model, unfortunately, is absent. This data collection terminal is being sold at a price of 44 thousand rubles.

Device "Honeyvel"

This TSD (data collection terminal) is used in small enterprises. The accuracy of reading the code is low. It is also important to note that the beam width can not be adjusted. Directly the scanner is located at an angle of 15 degrees. The processor is of low power. However, it is sufficient to provide an average reading speed of 60 scans per second.

In this case there is only 2 MB of memory. By design, this device for reading data is simple. It weighs 275 g. All the main codes the system supports. The font size in this case can not be changed. The reading width is 230 mm. This device is being sold to collect data in the store for 38 thousand rubles.

Parameters of model "Motorola MC9190"

The Motorola MS9190 Data Collection Terminal is suitable for storage space. The maximum allowable resolution is 430 by 280 pixels. The width of the beam in this case can not be adjusted. However, the advantages of the model is quite a lot. First of all, a powerful processor deserves attention. With its help, the reading speed exceeds 70 scans per second. It is also important to mention the presence of dynamics.

Codes E8 E20 system supports. In total, there are two batteries in the standard kit. Suffices them for about ten hours of continuous operation of the terminal. If necessary, the user can change the data table. The scanner is applied laser type. The maximum permissible temperature of this data acquisition device is 45 degrees. The protection system is used by IP50. At a distance of 30 mm, the reading width of the data is 200 mm. The display system is of diode type. You can buy this device for data collection for only 38 thousand rubles.

Features of the Cipherlab model

The Cipherlab data collection terminal is in high demand. The processor in it is applied to 62 bits. If necessary, the user can change the data table. It is also possible to choose the font size and color. The function of sound notification during scanning is absent. The display system is of diode type. In total, there are two batteries. The reading speed of this data acquisition device is 75 scans per second. This model is sold at a price of 43 thousand rubles.

Description of the device Argox РТ2010

This data collection terminal is used in enterprises with large turnover. First of all, it is important to note that the model supports all international codes of goods. The read speed of the modification does not exceed 78 scans per second. If necessary, the display resolution can be changed. The scanner in the data acquisition device is located at an angle of 15 degrees.

In terms of dimensions, the model is compact and in the hand holds remarkably. The batteries are of lithium-ion type. When fully charged, they last for about seven hours of operation of the terminal. Sold the device at a price of 41 thousand rubles.

Parameters of Intermec C30

This device for data collection is useful in inventory. The scanning width in this case is adjustable. It is also important to note that the model has a high-quality monochrome display. If we talk about shortcomings, we must mention the small angle of the scanner. Sometimes they are uncomfortable. The display system is standard. The sound notification function of the model is. In total, the device uses two speakers. The battery in the standard kit is only one. Buy this device for data collection can be priced from 47 thousand rubles.

Opticon Smart Terminal

The optical data collection terminal Opticon Smart has a high resolution and is compact at the same time. If we talk about the parameters of the model, it is important to note that the memory is provided for 4.6 MB, and the processor is set to 62 bits. The display is used in monochrome type, and the backlighting in it is quite bright. The width of the code reading is 310 mm. Dynamics in this case, the manufacturer is not provided.

The body is made of plastic and is able to withstand a fall from a height of 1.3 meters. The minimum permissible temperature of the present data acquisition device is -13 degrees. The model is afraid of high humidity. It is also important to note that it uses only one battery, and its capacity is only 430 mAh. When fully charged, it lasts about two hours. Buy the Opticon Smart data acquisition terminal for 34 500 rubles.

What in the end?

Given all of the above, it should be noted that among the budget models, one should definitely pay attention to "Honevel". The specified terminal makes it easy to configure the input information. Also it supports all the basic types of codes. The frequency of the processor allows you to process data at high speed.

If we talk about a more powerful terminal, then it's important to mention "Casio". It is quite expensive, but among other models stands out high resolution. Also, it should be noted that the user is able to very accurately adjust the beam of the device.