Stand for laptop with cooling will solve the problem of overheating

Laptops, like regular computers, are warming up during work. If you solve the problem of overheating the desktop PC by installing an additional fan or cooler, then with the laptop this option is unrealistic. Solve the problem of overheating can stand for laptop with cooling.

To reduce the temperature of internal elements of the computer use air systems. Air through special cracks in the bottom and through the keyboard enters inside, where with the help of built-in fans is run inside the case and comes out through the slots that are located in the ends of the case. Therefore, the laptop is not recommended to be placed on soft surfaces or to close the lid without disconnecting the computer. In this case, the airflow decreases and overheating may occur.

Improve cooling by increasing the amount of air that passes through the laptop and lowering its temperature. These tasks and solve the laptop stand with cooling. It contains a fan that blows into the bottom of the laptop, increasing airflow and contributing to a better Cooling. Ideally, the holes in the stand must match the holes in the bottom of the computer. A cooling stand for a laptop can reduce the temperature of internal elements by 5-15 ° C. With a small slope, this stand enhances the comfort of work: the position of the hands becomes more convenient and the viewing angle of the keyboard increases.

When choosing this device, pay attention to the speed of the fans, the type of bearing and the number of fans. The type of bearing determines the noise level, which creates a notebook stand with cooling during operation. The most silent among the bearings is hydrodynamic, then goes centrifugal, the most noise bearing is sliding.

The cooling capacity of this device depends on the number of fans and the speed of their rotation. It is clear that the higher the speed of rotation of the blades, the more powerful airflow will be created. With a speed of 2200 rpm, the CPU temperature is reduced by 10 ° C and at 1600 by 5 ° C. It is very convenient if the notebook stand with a cooling has a speed switch: for different intensities of use or under different temperature conditions, different Cooling modes.

Feeds the stand through the USB input of the laptop, and in order to compensate for the busy port, the stand has its own USB connectors. Some models are equipped with hard drive or USB Hub (for example, in the Zalman ZM-NC2500Plus), with speakers (Logitech LapDesk N700). But keep in mind that these "bells and whistles" significantly increase the cost of the device, and if they are not necessary, then it is unreasonable to overpay for excesses.

In the model range there is a laptop stand on the Logitech LapDesk N700 lap, the LogitechCoolingPadN120 modification has an almost flat bottom, so it is convenient enough to use both on the lap and on the table. Among a large number of different stands of different designs, colors, made of different materials with different characteristics, you can easily find the option that will be most acceptable for you.