Repair of entrance metal doors with your own hands

Of course, the metal entrance doors are much more reliable than wooden structures. Only it is still possible that, at one time or another, it will be necessary to repair steel doors made of metal. And in this case it is advisable to consult a specialist, but small damages can be eliminated with your own hands.

Malfunction of the lock

The most common problem that can occur in most people is a broken lock. If it is possible to find a similar locking device of the required diameter, it will be sufficient to replace the entire mechanism. With simple locks, everything is much simpler, but if a good lock is installed, for example, with vertical bolts, then in this case it is worth turning to a specialist.

Broken door

Strongly noticeable defect, so it will not be left without attention of the owners of the apartment or house. There are several reasons for this problem, some of which can be eliminated on their own. Only it is necessary immediately to estimate own possibilities and if necessary it is desirable to call a professional.

Trouble-shooting:

- Breakage or loosening of loops. This happens quite often, and most often it is eliminated without assistance. If the loops are loosened or broken, then this trouble can be easily eliminated with your own hands. Buy these items can be in any specialized store.

- The big weight of the door. If the entrance door is very heavy, then the repair of the entrance metal doors will need to be done at certain intervals. The loops will weaken, unable to withstand their weight. The only way out can only be a patient replacement of loops.

- Shrinkage at home. The most unpleasant situation that can occur, because the consequence of such a problem in most cases is a complete replacement of the door and the doorway. Most often this happens in houses of block and monolithic type. Less problematic solution will be the owners of private homes. There are times when repairing the entrance doors will help a special wedge, installed under the base of the door frame.

The appearance of rust

Poor paint quality, scratches, small defects on the door may be the cause of rust in certain places. The lower part of the door is the place where such a problem can easily be formed. The only way to eliminate - the holding of certain activities, including coloring. In this case, in order to save money, it is necessary to repair the door yourself.

Necessary tools for work:

- Medium and fine abrasive skin.

- Brush for metal.

- Putty on metal.

- Putty knife.

- Thinner.

- Primer and paint in spray cans.

Steps to fix the problem:

- Preparation of doors for repairing the entrance metal doors. At the first stage, it is necessary to dismantle the fittings and seals. Also it is necessary to protect the inner skin. In this case, the assistant will be a simple film.

- Remove unnecessary (spoiled paint) and rust. First it is necessary to work with a coarse sandpaper, and then it is necessary to apply a fine one to remove large scratches. It should also be said that there are doors with forging and imitation panels. Here the assistant will be a drill with a special nozzle.

- Degreasing the problem surface. Do not start the next stage of work, if the solvent has not dried out.

- Work with putty. After doing the above steps, you can start applying the putty on the problem part of the metal door. It is advisable to apply at least two layers, but between them it is necessary to wait for the layers to dry up. Only after this you can proceed to align this material.

- Aerosol primer. This substance must be primed the entire surface of the door.

- Application of paint. When the previous layer, namely aerosol, dries, the first coat of paint can be applied. No one needs paint, so the door should be placed on the floor or other horizontal surface. When the entrance metal doors are repaired, so as not to contaminate the surrounding objects and the floor including, you can overlay everything with cardboard or other auxiliary materials.

- The second coat of paint. This step is performed only if the first layer of paint has dried completely. Also before this, you can sandish the formed sweats.

When the door is brought into the desired form, it can be put on hinges.

Sound insulation of the entrance door

Unfortunately, many entrance doors made of metal structures do not have good sound insulation. Of course, this situation leads to the fact that in the daytime and at night all the residents of the apartment or house will be disturbed by extraneous sounds coming from the street or the entrance. The only solution is to repair the entrance metal doors with increasing the layer of soundproof materials.

Do independent work or call an expert? You could say it's a double-edged sword. If there is the necessary experience in carrying out repair work of various levels of complexity, then you can do them yourself. But still worth remembering about their complexity. If there is no experience, then it's best to contact a knowledgeable person (this can be just help in the form of prompts, or maybe a full-fledged work).

Repair of interior doors

Concerning the topic of repair of metal doors, it is worth mentioning the repair of interior doors. This is in most cases the wooden part of the apartment or house, also these doors open many times more often than the entrance doors. Based on these facts, the probability of their breakdown is higher.

Main problems:

- Scratches, peeling paint, etc.

- Broken lock, handle.

- Displacement of the door and the door frame.

- Squeak, weakening loops.

Basically, such problems do not require additional knowledge and skills, so you can do the necessary work without the help of a specialist. This will save time and money.

Conclusion

If it is necessary to repair the doors of interior and entrance, then always, depending on the problem and difficulty level, you can choose between independent work and the help of a professional. Therefore, do not immediately call the workshop, because you can first assess their own strengths and capabilities.