"IPhone is disabled, connect to iTunes": how to unlock without losing the Iphone 5 data?

The American company "Apple" is a reliable supplier of modern smartphones, tablet computers to the international arena of digital technology. The devices of the company are based on their own platform, in which an operating system called "Ayios" is implemented. It should be noted that it was the right, competent, skilful optimization of the software that allowed engineers to build in hardware less powerful (in comparison with competitors) hardware, and thus two corresponding smartphones will have almost equal performance. Unfortunately, even the operating system of "apples" has a considerable number of flaws. We will talk about one of them today. There is a problem with the inscription "iPhone is disabled. Connect to iTunes. " How do I unlock iOS 7 in this case? What do you need to do at all? Let's first talk about what makes this problem possible at all.

Causes

The emergence of such a problem with the human factor. Especially forgetful users are most susceptible to the collision probability. Probably, each of us at least once forgot the password. It does not matter what it was from: email, smartphone or even a personal computer. I would like to advise those who are afraid that they will forget the password, or somewhere to write it down, or use alternative methods. Otherwise, you run the risk of encountering a very unpleasant and exhausting procedure for its recovery. Many users on the forums ask questions like this: "The system reports: iPhone is off, connect to iTunes. How to unlock iOS 8? ". First, let's understand that the sequence of actions on iOS 7 and iOS 8 will be the same. You can say almost identical. Recall that a similar problem can be detected when working not only with iPhones, but also with other "apple" devices.

"IPhone is offline, connect to iTunes." How to unlock without losing data?

We all know perfectly well that any smartphone does not block the device right away, but it gives the chance to choose a password if you mistakenly entered the wrong combination of characters. This method can be used if the number of options is limited and you know for certain. Many people do not know what to do when the message "iPhone is turned off, connect to iTunes" appears on the screen, how to save the data while doing this. Do not rush to reset your device to factory settings. Try to sit down and ponder, to remember when the last time you changed the password, and whether you changed it at all. Perhaps, somewhere you have a clue left at that moment. Otherwise, you will have to resort to hardware capabilities. By the way, you have six attempts to enter a password. If all of them are used to no avail, the device will be blocked for one minute, and a corresponding inscription will appear on its screen.

Does the problem depend on the firmware?

If you have previously dealt with several versions of operating systems and encountered a similar problem, you might notice some differences in the essence of this unpleasant process. Interestingly, all firmware can be divided into several groups (if you compare them by this criterion). For example, the firmware from the first group with each third incorrect password entry increases the wait time before the screen unlock. The second group has a fixed blocking time before the possibility of subsequent entry. But the firmware from the third group (and the most unpleasant ones) give a limited number of attempts, after which the message "iPhone is disconnected, connect to iTunes" appears on the screen. What to do in this case?

Disadvantage: fatality

All users (not only the "apple" platform), developers recommend creating backup copies of data. This is true for "Ajosa", and for "Android", and for "Windows of Founs". The fact is that we never know when a device can fail. And to remain without those data that were on the device earlier, at times painful enough. Not the best of the sensations - to understand that all information from work or photos of the family will be irretrievably destroyed. And for what? For the sake of just recovering the password. Do you agree that it would be much simpler to just write it somewhere or create a backup copy? It's not so much time. It is very unfortunate if you did not. In this case, the only way to recover information on the device is to manually select a password. But, as we found out earlier, not every firmware will give such an opportunity. So it turns out that if the user does not fit into a certain number of attempts, then he loses all the data.

If the data is not important

In the event that you see the words "iPhone is disabled, connect to iTunes" (iOS 7), and the data on the board of the device does not play a special role, you can reset the password counter using the appropriate program. Speech, of course, is about "Aityunse". Let's consider in addition the situation when you connect your device to another personal computer. Note that the situation is also true when you connect the iPad. So, adding your device to a "foreign" computer, we'll see an additional request that will notify us that the computer is trying to access the information stored on our device. Accordingly, you will be asked to authorize access. To continue the operation, press the button with the word "continue". Again, there will be an inscription that will notify us that for the access permission you need to perform simple actions on our device. But here there are some nuances. It may be that your screen will be blocked due to incorrect password entry. In this case, it is not possible to confirm access using the device.

Decision

Some users at this stage tend to give up and retreat back, driving themselves into a disappointed state. In fact, this should not be done, not all is lost. Indeed, you can always connect your "apple" to the "native" computer, where you can perform the operation to reset the counter without any additional permissions.

Let's start the reset

So, let's say that you still connected your device to a "familiar" computer or laptop. In this case, the aipad or iphone will be recognized almost instantly. Therefore, on our way there are no more obstacles that could prevent successful operation of zeroing the password counter. To do this, you need to perform the following actions. First, start "Aityuns". To work in it was more convenient, you can activate the sidebar. It can be seen on the left side of the user interface. Next, we connect our device to a personal computer using a USB cable. By the way, in parallel on the lock screen you can notice the corresponding inscription, which can tell you how long it will take to enter a new password (or maybe this situation does not arise). After connecting, check the screen. It is possible that the lock will be removed just by synchronization, because some firmware have exactly such features. If nothing has happened, but simply everything is still as before, then we have nothing left, as soon as we follow further instructions.

"Iphone is disabled. Connect to iTunes. " How to unlock Iphone 5?

So, what exactly is required from the user further? Look for the left side of the Iphone user interface and click on it. Next, select the synchronization function and apply it. Next, synchronization begins, but we do not let it finish. On the contrary, we interrupt with the help of a cross, which we press on time. The cross itself is at the top of the software interface, near the inscription "step 1 of 4". In some situations, after clicking, an arrow may appear. By the way, it will also need to be clicked. All this will allow us to stop the synchronization process started earlier.

Where it leads?

After performing such an operation, you will notice that the password entry counter will be reset or reset. In this case, we can again try to enter the password. Note that such an operation can be applied to the "apple" device unlimited number of times. At the same time, it does not matter at all whether an inscription will appear that you need to connect our device to "Aityuns". Although we, in fact, did this at a certain step. The role is played by the fact that, in principle, the meter is reset not only during the imperfect synchronization procedure, although we have taken it as an example. Other operations can also reset the counter by unbinding the user's hands so that the user can enter the password again and try combinations.

Can not remember the password?

So, let's assume that for a long time and persistently we tried to remember the fateful combination of symbols to unlock our device. But this did not happen. What actions can be taken further? In fact, the choice we have is not so great. The only alternative to manual selection is a complete reset of the device. The so-called hard reset. The drawback of this method is that all user data that was previously stored on the device will be permanently deleted.

When can this method be used?

First, it is possible that situations arise when the user tried all possible combinations, but he did not find the required one. And what to do then? Walking with a locked phone? Is it good for him if he is in a similar condition? The only way out, which will lead to the return of full functionality, is in this case just the same hard reset. Secondly, it may be easier to perform this operation if you have a backup copy of the data. We will remind you that the reset will be performed by transferring the device to recovery mode.