How to make a machine gun out of paper? Practical tips

The more you are fond of making crafts made of paper, the more you are fascinated and carried away by this ancient occupation. There are objects that can be easily and quickly made thanks to the art of origami, and this does not require you to do a great deal. But there are such things, the production of which will take not only a lot of time, but also a lot of patience and effort. But no matter how difficult you seem to be the process of making this or that craft paper made of paper, origami will give you in the end an unforgettable feeling of joy that can not be compared to anything. Do you know, for example, how to make a machine from paper?

To begin with, we will need A4 paper, a sheet of which we will arrange with a long side to ourselves, and then roll into a roll, but not too narrowly. To achieve the most flat surface, you can use a rolling pin, which you need to put on paper after you fold the sheet. Later it will be possible to remove it and seal the edges and the middle of the sheet with scotch tape.

Now we need another sheet of paper of the same size. To do this, it is necessary to put the first sheet on it and again roll it into a tube, fixing it with adhesive tape. As a result, we have two ready-made rolls of paper, one of which must easily enter the other. They are put into each other by several centimeters, after which they are fixed. In general, everything is quite simple, even if you did not know before about how to make a machine from paper.

These actions must be repeated so that we have two identical long rolls that will form the basis of the trunk of our machine. Putting them side by side and placing the edges at the same distance, we fix them with adhesive tape, after which we cut out a piece of 7-12 cm in one of the rolls. This is necessary for dividing the machine into a barrel and a piston.

Next, we have to make a shop and butt, for which we will act according to the previous scheme, turning A4 sheet on the long side and fixing its ends with scotch tape. The resulting roll should be flattened, laying on the table, since we need to get square rather than rounded elements. A quarter of the resulting part is cut off, after which the scissors are cut by an oblique cut from either side to allow the part to be attached to the trunk. Attaching it to the base, we get an butt. With the store we will make from the longer part, you need to do the same procedure, fixing it then about in the middle of the machine with the help of an adhesive tape.

The manufacture of our machine is complete. Now you know how to make a machine out of paper. In general, its production does not take much time. To achieve a more natural appearance, it is best to use yellow, brown or black sheets of paper. After completion, you can color it with markers. If you consider yourself an experienced origami lover and have enough free time, along with perseverance and patience, then you can refer to the special literature and learn more about how to make a machine out of paper.