Home Beauty Salon: Mask from black dots with activated charcoal

Is it possible to successfully use activated charcoal for the face? Mask, scrub, soap with charcoal - do they harm the skin? And how effective are they? Activated carbon really absorbs superfluous excess of dirt and grease, it is important only to apply it correctly.

From black dots make mask-film, to get rid of pimples - masks with clay. This takes into account the type of skin. For dry, fading skin, blue clay is the best choice. Black clay moisturizes, cleanses and fits all, white is the most effective, but it should not be used by owners of thin skin with closely located vessels. One measure of clay powder takes one measure of the crushed activated carbon, other necessary ingredients, for example, essential oils, are added.

The most popular mask from black dots with activated carbon is a mask-film that cleans not only thanks to active substances, but also mechanically. It is enough to take 1 tablespoon of water or other liquid (for example, milk) and 1 cup of gelatin to get a mask-film. It can add a wide variety of ingredients, including activated charcoal. Below you will find detailed information on how you can make such a mask.

How often is the mask made from black dots with activated carbon?

It depends on the degree of contamination and skin type. Standard - twice a week. It is desirable to do the procedures on a regular basis - this is how you can achieve a noticeable result. If the skin is very dry and sensitive, the mask from the black dots with activated charcoal is not your option, it is better to choose a softer means.

It is important to remember: a mask with activated charcoal in case of skin prone to couperose can not be done!

Mask from black dots with activated carbon - recipe

Ingredients

For one teaspoon of milk or water, you need to take half a teaspoon of gelatin and half the tablets of activated charcoal. This amount of mask will be enough for the T-zone. If it is necessary for the whole face, it is sufficient to increase proportionally the doses of all the components.

Cooking method

The activated charcoal must be grinded thoroughly, add gelatin and liquid. The resulting mass must be carefully mixed, since gelatin does not dissolve in water, but only swells. Next, the mask is heated, for example, in a microwave oven for 10-15 seconds. Then wait for it to cool down to an acceptable temperature - the mask is ready to be applied!

Mode of application

Many make this mask, not taking care of the correct preparation of the skin, and then wonder why there is no result. The skin needs to be cleaned and steamed, so that the pores are opened, and the upper layer of the black dots becomes softer and supple. In order to apply a mask, it is best to take a special brush - they are quite tough and allow you to "hammer" the mask into the pores. We apply the agent with patting movements, and then add one more layer, gently moving the brush. If you apply one thin layer, the mask will be difficult to remove, it will tear. It takes about a quarter of an hour to wait for complete drying. Now you can remove the mask. It will not be as solid as the ready-made masks that are sold in stores. Therefore, you need to shoot it neatly, to make it a whole piece, otherwise it will have to be washed away and part of the effect will simply disappear. Remains of the mask can be removed by any suitable cleanser (lotion, milk) and apply a cream on the skin with a mild soothing, moisturizing and restoring effect.

Means for narrowing the pores

In order to reduce the size of the pores, you can prepare ice cubes with charcoal and wipe your face once or twice a day. You can replace this procedure with washing. As you know, the cold perfectly contributes to narrowing the pores, which is actively used in modern cosmetology, offering clients various cryotherapy treatments. In addition to exposure to the pores, such ice cubes tone up the skin, prevent premature aging.

How else can I use activated carbon from acne?

The mask is not all that this ingredient is capable of. On sale it is possible to find daily cleansing agents, NaturaSiberica has soap detox in the line, which absorbs pollution as much as possible thanks to activated charcoal. At home, in addition to masks with clay and mask-films, you can make masks with sea salt. For example, according to the following recipe: one part of powdered activated carbon, one part of fresh aloe juice, and one third of the sea salt. In this mixture, you can add the essential oil you like, for example, known for its anti-inflammatory properties of tea tree oil. To determine the amount of essential oil, follow the instructions to it, but usually it is not more than three drops. All this mixture should be diluted with water so that a thick enough gruel is obtained. Keep the mask on your face for about a quarter of an hour.

Scrub with charcoal

Especially popular is the facial scrub with charcoal. Such a scrub is not recommended for those who have thin, sensitive, inflamed skin or skin with very wide pores, which can become even more mechanical. All the rest can recommend an effective and very easy to prepare cleansing scrub. In order to do it, you need two tablets of activated charcoal, some water to dissolve tablets in it, aloe juice, honey and sugar (each ingredient is a teaspoonful). This scrub is applied as a mask, for 20 minutes, during this time it will dry, after which you can wash it off with water, while doing a very light facial massage.

As you can see, such an affordable and cheap ingredient, as activated charcoal, can be successfully applied in a variety of beauty recipes.