Gel-nail polish for RuNail MultiLac: properties, features, technique of use. "Multilak Runel": reviews

Modern means for creating a manicure should not only be beautiful, but also have a number of useful characteristics. It is convenient when the varnish is applied once, remaining on the nails for a long time. An important role is played by the time spent on rapid application of the coating. Therefore, many ladies were pleased with the sales gel-lacquers. At the same time, many girls do not like the length of the procedure and the need to pay for the variety of additional funds. How can you create a quality manicure in a relatively short period? Is it possible that it will survive on the nails for a long time? Of course, such a tool already exists. This is the "Multilak Runel". Reviews about it are given in this article.

MultiLac Features

Lacquer coating is a modern means for nail care. It is characterized by a brilliant brilliance. Apply by analogy with conventional varnish. At the same time, nails acquire a rather natural appearance, which is fully inherent in such a coating as Multilak Runel. The reviews confirm that the product does not make the nails heavier.

In comparison with permanent varnish, its shine is stronger. It is caused by the absence of an adhesive layer. The tool is equipped with a convenient brush. And its structure is quite soft. The manicure is performed relatively quickly. This is due to the fact that when applying gel-varnish, you do not need to use the base and finish. Also, the coating does not have a sticky layer. This greatly saves time. It turns out, when you need to create a truly persistent manicure, it is better to use "Multilak Runel." Testimonials confirm the fact of keeping your hands impeccable for 3 weeks. The chipping and erasing are completely eliminated. The main advantage of the varnish is a radiant glossy gloss and a bright saturated color. It is made in China.

How do I apply?

It is important not only to use gel-lacquer, but also to enjoy it. Moreover, it is not difficult to do this. Therefore, to purchase "Multilak Runel", reviews about the appearance of which are given in the article, it is convenient for almost every girl.

The use of the tool is reduced to very simple actions:

1. Application of degreasing agent. This is done in order to prepare a nail plate.
2. Application of thin layer MultiLac. Polymerization in the UV lamp 36 W - 2 min., Or in the Led lamp - 1 min.
3. Re-applying MultiLac. The polymerization is carried out in the same way as last time.

Customer Reviews

When you want to quickly make a persistent manicure, you need to use the gel-varnish "Multilak Runel." The reviews confirm that the gloss looks beautiful during the entire period declared by the manufacturer. Home affairs, sauna, frequent washing of hands do not affect the appearance of manicure.

Also, customers like the availability of the product and at the same time its economical use. Guided by even these two features, girls are happy to purchase a gel-varnish for nails Runail Multilac. Customer feedback confirms that the creation of a coating does not require significant effort. In this case, customers often recommend several times to use MultiLac. This will make it possible to make the most complete picture of the peculiarities of such a manicure, as well as to discover all the subtleties of its execution and wearing.

Amazing tool

Many girls call these varnishes a brilliant invention. After all, you just need to do a manicure, and then light your nails using a lamp. After that, you can forget about the beauty of your nails for a long enough period. Therefore, the logical question is: "Why use ordinary varnishes, which should be updated every 3 days?" This is a fairly time consuming process. It's much easier to buy one amazing tool.

What is the single-phase gel-lacquer "Multilak"? With it, you can perform a quality manicure every 3 weeks and after that only enjoy the appearance of the hands. Also in the reviews it is told about the strong luster of the coating during the first week. Only a week later he becomes a bit duller.

Nails design

For all multilakas, a dense texture is characteristic. They perfectly fit in 2 layers and overlap the nail without translucence. For the drawings, gel-varnishes or paints are used. But here there is a small nuance. Before drawing, the base coat should not be completely dried. If you need to design, then it's enough to dry your nails for 20-30 seconds. After that, the jacket or images are executed on the undried surface. Then a glossy fixer for gel-varnish should be used.

And if you want to depict a smile on the overgrown edge, then first you need to remove the gloss from the coating. Then you need to draw a smiley face and "seal" the surface with a fixer. If the color coating is initially applied by two layers, then it does not suffer.

How to remove the coating correctly

An important point in using any gel varnish is to remove the coating. This is quite reasonable, because the correct approach to the case allows you not to injure the nail plate. As some customer testimonials testify, the gel-varnish Runail is not very easy to remove. Although there are also many positive opinions.

Removing the cover is much easier than in a three-phase system, the base in which may well not depart. Owners of manicure are often forced to exert considerable effort to tear off the coating. At the same time, "Multilak" is removed very easily, like dry plaster. To remove the coating, you can use any lacquer removal fluid containing acetone. There is also a special tool from Runail. The specifics of the work on the gels of this firm suggests several subtleties when removing.

What do you need for a qualitative withdrawal?

For proper removal of manicure, you need to hold the nails under the foil for 20 minutes. There are testimonials in the network, indicating how difficult it was for many girls to take cover. Often they simply forgot about cutting the top glossy layer. In the reviews there is advice: when removing the cover, you need to use a stick. It needs to be carried on the nail, pushing it with force. Thus, the removal of varnish is equated with the removal of plaster. Therefore, before removing, the cover should be sawed using a buff. This allows you to remove the upper glossy layer. Then you need to put the nails in the foil and use the liquid designed to remove acrylic. It also requires a metallic pusher.

Customer Reviews

It is possible for the first time simply to wipe the nails with a liquid to remove the varnish and apply a remedy. After that, the nails, of course, grow. Without a preliminary preparation, very soon the manicure begins to look ugly. But the coverage in any case is qualitative.

Before applying the remedy, some girls advise using a technique such as a "lacquered square". Although the situation looks quite interesting. After all, women have always wanted to make a durable nail cover. And now it turned out that gel-lacquer is very difficult to remove. In any case, "Multilak" became among the customers a real sensation.

Using the bond

Many clients are worried about the need to apply the basics. Under this gel-lacquer do not need to apply primer. This can be seen as another money saving. It is only necessary to degrease the nail plate using the bond. Or it must be an acid-free primer. For moist nails, you should apply the bond. In other cases, the primer is not used at all.

With the help of a bond, the nail plate is cleaned and dried. Thus, it is prepared for the application of a colored layer. Also, the drug is suitable for any building technology.

Problems in applying

In the reviews, there was a small problem that arose when the product was applied. It consists in the formation of small bubbles on the surface of the varnish. There are also traces, as from a touch with a needle. When faced with a similar problem, you need to use a more dense layer of varnish. In this case, the coating turns out to be really homogeneous.

You can take only 1 drop of the drug and smear it on the nail plate. Also, bubbles and dimples can form due to insufficient degreasing of the nails. Therefore, they should be treated with a bass and then applied "Multilak".

A few more important points

In addition, all new items are tested repeatedly by employees of the company Runail. They are necessarily passed to the masters for verification. Only after this, the product goes on sale. Many craftsmen are concerned with the question of how much a manicure costs for a customer if using the Runail professional (Multilac) gel varnish. Since the coating is single-phase, its price is slightly lower than for a three-phase gel-varnish. In addition, working with multilakers is faster and easier than with other identical means. Therefore, when using it, you can serve a larger number of clients. Earnings will also increase as a result.

A beautiful manicure at home is a reality. Good nail design with minimal master effort is also possible. And all this happens thanks to such a tool as Multilac.