Elektrorabanki Makita: review, specifications, models and reviews of the owners

Rubanok is included in the sets of traditional carpentry tools. Despite the general technological development of construction equipment, the quality of mechanical parts is still of key importance in the development of such models. Therefore, although electronic systems are being introduced, they have only an auxiliary function. Modern electric Makarka also has a well-thought-out design, as evidenced by the use of high-strength alloys in the working elements, and the convenience of the handles.

General Information on Makita Electro-Banks

Almost all models of planes of the Japanese ruler are universal and multifunctional. Already in the initial segment, the apparatuses receive chip ejection systems, ergonomic blade changing mechanisms, and technologies that ensure the safety of the engine function. As for the structural features, the Makita electric guns are supplied with a smooth aluminum support sole, while the main body is made with reliable insulation. To work with the tool, a small effort on the part of the operator, which also has the ability to adjust the thickness of the cut formation.

The ability to cut planes is noteworthy. Designers have provided for the manufacture of blades a special tungsten alloy. With competent tuning and skillful handling of the device, you can get a clean cut without cuts. Of course, to achieve a qualitative result, it is important to correctly approach the primary choice of the model. This will help to make an overview of the Makita electro-banks, presented below.

Model KP0800X1

One of the most successful representatives of the junior level is the KP0800X1, whose power potential is 620 watts. By general standards in the segment this is a modest capacity, but it is enough for confident processing of solid wood species. The width of the cut reaches 82 mm at a maximum depth of 5 mm. Such characteristics are quite suitable for work at home. A revolving engine with a frequency of 17000 rpm eliminates the need for unnecessary manipulation during operation, allowing more attention to be paid to balancing. The overall merits of the Makita electro-banks of the initial level include maneuverability, low weight and compactness. These qualities compensate for the lack of power and performance.

Model KP 0810 CK

In the middle level the model KP 0810 CK is in high demand. In this case, the power reaches already 1050 W at a frequency of about 12000 rpm. It should be noted that with this modification the manufacturer starts supplying the tool with the option of soft starting the engine, which prevents accidental damage to the workpiece due to sudden movements with recoil. The standard also provides for the ability to maintain constant speed at high loads. Universal "Makita" electric carbines of this series are suitable for performing different processing of wooden surfaces, including for accurate removal of chamfers, planing and quarter selection. Despite the increase in power compared to the previous model, this version almost did not lose in maneuverability. With a mass of 3.4 kg, the device allows you to point out unnecessary with blanks, performing operations that are close in quality to grinding. By the way, the most accurate result by shearing can be obtained by setting the minimum thickness of the working knife.

Model KP 312 S

This modification can be called exclusive. The electrobrush is designed for intensive surface treatment in the scale of large-scale production and construction activities. The power of the device is 2200 W, and the width of the treatment layer is 312 mm. The user can vary the depth of the seam in the range of 1.5-3.5 mm. In addition to a powerful power unit and design advantages, the model is distinguished by the presence of an electronic filling. The dust collector, the soft start function, the engine stop system - these and other additions determined the high ergonomic level that the Makita electric hitch has. The price of this machine is about 115-120 thousand rubles. This is several times higher than the cost of planes from the middle segment, but such a difference is justified, since the capacity of the unit is sufficient to solve non-trivial tasks for processing a tree that a typical tool will not cope with.

Reviews about electrolanks "Makita"

Wishing to provide housekeeping электрорубанком the Japanese manufacturer offers models with different characteristics. At the same time, owners also note common for most representatives of the quality brand, among which are effective noise isolation, comfortable designs, from the point of view of manual handling, qualitatively cutting blades and reliable engine. On the other hand, there is a modesty in the functionality that the Makita electro-banks receive. Comments on some models complain about the lack of backlighting, as well as the options associated with chip removal systems. Devices for removing wastes exist in almost all modifications, but their capabilities are not enough, as there is a rapid filling of the nozzles.

Conclusion

In the general segment of electro-banks, a variety of companies represent their products, including many world brands. Actually, they form a technological fashion for the manufacture of tools. The main competitors are the Bosch and Makita electric guns, which offer approximately similar opportunities for the processing of wood lumber. Differences are expressed only in the levels of development of individual areas. So, if German designers focus on ergonomics and additional options, then the Japanese make more efforts in improving the design of the instrument. This can be seen in the external device of the case, which in some versions has double insulation, and according to the proprietary technology of manufacturing blades, providing for the possibility of adjusting the position of the functional element.