Drill rechargeable Makita 6261DWPE: description, technical specifications, reviews

The Makita 6261DWPE rechargeable drill is a tool for twisting fasteners and drilling holes.

Why you should buy

The equipment has an increased output power, which successfully combines with the compactness of the case. All these features provide high performance. You can replace the tooling without much effort with a quick-action chuck. Depending on the intensity of the work, you can set the torque.

Specifications

Makita 6261DWPE has a battery whose voltage is 9.6V, its capacity is 1.3 Ah. With this tool you can drill holes in the metal, whose diameter is 10 millimeters. If it is necessary to carry out such manipulations with wood, then the diameter of the holes made can be equal to 21 millimeters. The device works by means of a brush motor, which provides a maximum torque of 24 Newton-meter. The device is equipped with a 10-mm cartridge, and it is permissible to work at one of two possible speeds.

The Makita 6261DWPE does not have a shock function, but you can use the reverse. Working with the device is very convenient, since it has a fairly compact size: 192 x 239 millimeters. Two batteries are supplied. This drill is excellent for solving domestic problems. It fits perfectly in your hand, and you will not get tired, since the weight of the device is 1.4 kilograms. Charge if necessary, you can only half an hour.

Model Description

The drill-screwdriver works on the battery and does an excellent job of drilling holes in a variety of materials, with it you can remove and install fasteners in the type of screws and screws. The design features a rubber grip, which is characterized by ergonomics. An additional convenience is the electronic speed control. Before buying, it is necessary to pay attention to the fact that the model does not have a switch lock, which is not always convenient when working. There are also no illumination of the working area. In the complete set are delivered: a charger, a two-sided bit, the length of which is equal to 50 millimeters. Considering the model Makita 6261DWPE, you will notice that it has a convenient and large speed switch.

Feedback on the main characteristics

Many consumers purchase the described tool for construction works. As practice shows and reviews, the equipment can last for several years, and the capacity will be sufficient for any work. Home masters note that with the help of this unit you can screw in any screws, drill a tree with a small diameter drill. If there is a need to do more impressive diameter holes, then you should use a professional drill.

Working at a height with the help of such a tool is very convenient, since it has a low weight. Experienced buyers argue that after the fall the body remains in safety, there are no cracks on it. This indicates a high wear resistance. It should be expected that after a few years of operation the Makita 6261DWPE drill may lose power and capacity of the batteries. If you encounter such a problem, you will need to decide: to purchase two new batteries, the cost of which is 2500 rubles., Or add to buy a new screwdriver for 3700 rubles. For household use, this model fits as well as possible.

Safety Reviews

Experienced masters advised to maintain order in the workplace, as well as to ensure a good illumination of the table. The causes of accidents can be dark places and cluttered areas. It should be avoided working with power tools in places where the atmosphere is considered explosive. This includes the close presence of flammable liquids and gases, as well as a large accumulation of dust.

According to users, the Makita 6261DWPE drill- driver acts as a source of sparks, they can cause a fire of fumes or dust. Therefore, the organization of the workplace must be taken very seriously. Make sure that the plug matches the socket. Experts do not advise modifying the plug yourself. According to users, if you use the original plugs, as well as the corresponding sockets, you can significantly reduce the risk of electric shock to the operator.

Feedback on the operation

When working with power tools, you must hold it by insulated surfaces. It is important to exclude the possibility of contact of the cutting elements with concealed wiring or own cord. If contact with a live wire occurs, it may cause the electrician to lose power.

Those people who have used the Makita 6261DWPE drill for more than one year, especially emphasize that it is necessary to provide a quality leg support during operation. If manipulations are made at altitude, you need to make sure that there is no one below. Keep hands as far as possible from the rotating parts. Do not leave the equipment working when you are not holding it. Immediately after the completion of the work, specialists do not recommend touching the workpiece or drill, as the surfaces may be too hot, which will lead to skin burns.

Reviews on the safety of the operation of power tools with battery pack

The battery pack must never be disassembled in any way. If electrolyte gets into your eyes, you should rinse them with clean water, and then seek medical help. If this is not done, the result may be loss of vision. If the battery pack is not to be used, then the terminals must be covered with a cover. Wizards using Makita 6261DWPE, which feedback will help you make the right choice, note that it is necessary to exclude contact of batteries with other conductive materials.

The battery pack must in no case be stored in a container with other metal objects, such as coins or nails. It is important to exclude the interaction of the battery pack with moisture. If the battery is short-circuited, this may cause a strong current supply, fire and overheating, in some cases the battery is out of order.

Feedback on removing and installing the battery pack

Before performing the above manipulations, the tool must be switched off. In order to remove the battery pack, it must be removed from the instrument by pressing the buttons located on both sides of the battery pack. When a Makita 6261DWPE rechargeable battery drill is operated, it is often necessary to install a battery pack. For this, it is necessary to combine the tongue of the element with the groove in the body. After that, the element is put in place. You should hear a characteristic click, and if you do not, the unit may fall out of the power tool during use. Such unpleasant moments can cause damage not only to the block itself, but also to the operator's feet.