Dowel for gypsum board - a convenient way of fixing

To date, one of the most common ways of decorating, leveling walls and ceilings in a room is a frame installation. In production, fasteners and various products are often used, including dowels for Gypsum board, which are characterized by good ability to withstand high loads. The choice of anchorage for the frame depends on the quality of the material of the ceiling or bearing wall, as well as the weight of the attachments or the structure to be mounted.

In most cases, the use of conventional nails is unacceptable due to the fact that these skeletons are very fragile and easily scattered into crumbs. Thus, a concrete or gypsum board will not hold the base. When the hole crumbles, the nail will fall out or bend. There is a risk that the structure will just collapse one day on your head.

And this is why dowels for gypsum board are used for reliable fastening to the surface. The method involving the use of wooden plugs is not entirely perfect, because after a while the insert starts to crumble, and the connection eventually flies out of the hole. In most cases, the dowel for gypsum board is made of a polymer that resists splitting and does not lose shape. But often it is made of nylon or polypropylene. Many prefer
Use them because of their high plasticity and viscosity. Due to the use of a screwed screw or screw, a secure retention of the side parts of the dowel in the hole is achieved.
There is a large number of fasteners using a dowel connection. You can choose the product yourself, based on the desired diameter and length, but usually prefer self-cutting elements. Also, you can choose in favor of a special design, which takes into account the features of the application. If it is necessary to attach a suspension frame, it will be most convenient to use a dowel for gypsum board. Good results are obtained by the use of a special frame for dowels when attaching suspension equipment.

Also, there are self-expanding dowels, in which the head is tightly hammered into the fastener during the clogging. But there are many other types that allow fixing the impact mount with insufficient thickness of the fasteners. When attaching attachments, the thickness must always be considered. If the thickness of the sheet is 12.5 millimeters, the maximum permissible
Load on the dowel for gypsum board is 30 kilograms.

Before you begin to qualitatively fasten the dowels, you need to carefully prepare the hole. Usually it is drilled with a drill with a hard material or a perforator. In this case, the diameter and depth of the hole in the used nozzles are extremely important, which provide the necessary location of the central part.

For fixing sheets of gypsum board and fixing the metal profile , an anchor is used for gypsum board. The main safety requirement is the reliability of connecting the elements.