HobbyNeedlework

Designer's own cardboard

More and more popular are various souvenirs in the style of hand made. Making such things for some becomes a pleasant hobby, and for someone and a lucrative business. Souvenirs made of paper and cardboard (postcards, gift envelopes, boxes, packages) are beautiful and simple in terms of technology. To create such objects, you will need designer cardboard, scrapbooking paper or other decorative paper . Are colored sheets expensive, so if you want to find a budget option, then make the material yourself.

Buy or make yourself

It is not difficult to buy designer cardboard. You can order via the Internet, if it is not in the shops of your village. Produce yourself quickly, simply, and the necessary materials are cheap and available. In addition, you can get exclusive sheets with a pattern that is right for you. Postcards made of such material will look very impressive.

Materials and Tools

To make a design cardboard with your own hands, you will need the following:

  • Ordinary white cardboard for children's creativity or thick paper;
  • Roll of food film (or a part of it, sufficient in size);
  • Table napkins with decorative pattern;
  • Gauze, thin fabric;
  • iron.

Of course, if you only need one sheet, it is possible that the purchase of materials will cost more than a sheet of beautiful cardboard, since napkins will have to buy a whole pack. And if you do many products made of decorative material, for example cards or gift boxes for the New Year, then this method will justify itself in full.

Designer's own cardboard: technology

When everything is prepared, start working. The sequence of steps is as follows.

Take a napkin and iron it with an iron so that no wrinkles and unevenness remain.

Separate the top layer with the pattern from the white substrate.

Put on a flat surface (ironing board) a sheet of cardboard for children's creativity. It is better to spread a sheet or an unnecessary cloth as the base so that the excess edges of the film do not stick to the surface of the board.

The second layer spread the food film.

The third layer - the decorative part of the napkin - is located bright side to itself (not to the cardboard).

Place gauze or thin cloth on top.

Stroke the prepared design with an iron with sufficient heating. Suitable mode is "cotton" or maximum temperature.

Start smoothing from the middle to the edges, which you pay special attention to.

Cut the excess napkins and film along the sheet contour.

Iron again from both sides.

Your sheet is ready. Having mastered the technology, you can experiment not only with the colors of napkins, but also with the base material. You can use a two-sided workpiece.

Interesting effects are obtained with photo paper or colored sheets. In a word, there are many opportunities for creativity.

How to make postcards and boxes from designer cardboard

It is clear that you will not be able to make decorative sheets in order to simply look at them. From the material made it is easy to make an exclusive packing or postcard. If for a box you have to draw or print a scan pattern on the printer, cut it out and glue together a three-dimensional product, then it's easy to make a greeting card, just by folding the prepared sheet in half. Do not forget to pre-guide the fold line and it is better to make a groove with a spoke or a non-writing pen. This little trick will allow to fold the sheet smoothly and neatly without deformations.

In order to get an effective postcard it was enough just one fold, you need to place the napkin with the pattern on the front and inside so that each side of the future postcard looks like a complete beautiful composition.

So, to make a design cardboard with a thematic print and a pleasant texture of the surface is easy and, if it is required in large quantities, it is very profitable.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.delachieve.com. Theme powered by WordPress.