What if there is no signal on Tricolor?

Satellite TV Tricolor has long been popular with a large number of viewers - and all thanks to the large number of channels and the quality of broadcasting. But even with the latest technology, such a nuisance as a lack of signal can happen.

What to do if the inscription on Tricolor "No Signal" appeared only on several channels, while the others show

In the event that the signal has disappeared only on several channels, you will need to update their list. This will require:

- Disconnect the receiver from the power supply unit for about a minute, then connect it and wait for the receiver to return to operating state, and then switch it to the encoded channel.

- In the event that there is no signal on Tricolor TV again, perform a channel search, which can be done using the remote control panel for the receiver. Enter the menu, then search for "Tricolor-TV" channels, then press OK, then the yellow "Finish" button and finally the "Exit". Then the channel search will start. During the search, two buttons will be displayed - "All Radio" and "All TV". At the end of the search, a window will appear with the number of TV channels found.

Be sure to save the detected TV channels. To do this, click the "OK" button. After that, the receiver must turn on "Tricolor-TV".

What to do if the inscription on Tricolor "No Signal" is displayed on all TV channels

If the signal disappeared on all TV channels, this indicates a low level. Then you will need to check the connection between the cable and the receiver, its reliability and the integrity of the connections at the connection points of the connectors.

If the connection is still correct and there are no damages on the cable, and there is no signal on Tricolor, then the antenna must be tuned manually. To do this, it is best to contact the regional dealer to call the master at home.

To adjust the antenna yourself, it's necessary to move the antenna very slowly, one centimeter to move the antenna, fixing it for 5 seconds in each position, until an image appears on Tricolor TV. The strength and quality of the signal can be checked using the information banner located on this TV channel by pressing the "i" button twice. In this case, the signal and quality scales will be displayed at the bottom of the screen (right quality and left power). To view Tricolor-TV channels, these two scales must be filled at least 70%, only in this case the viewing will be stable.

What to do if the inscription on Tricolor "No Signal" is displayed and on

In most cases, the procedure described above is helpful, but sometimes you have to resort to more radical measures that require resetting the receiver's factory settings. To do this, you must turn on the receiver. On the remote, after pressing the "Menu" button, the entire menu of the receiver will be displayed.

Using the arrows "Down" and "Up" located on the remote control, you need to go to the item "Installation". Then, to enter the submenu, press the "OK" button and enter the required PIN: 0000.

In the next opened submenu, select the "Factory settings" arrows and press "OK". Then press the "F1" button and confirm the reset of the existing settings, then wait a minute for the process to finish.

The "Next" button appears in the settings wizard. Click again "OK", and repeat this way in each window that appears, without changing the value, until "Tricolor TV Channel Search" appears.

After the automatic search is completed, the number of detected radio and TV channels will be displayed. And the "Done" button will be available for clicking. Press the "F3" button, which will save you all the channels found. Enjoy watching high-quality television!

From this article you learned what to do in case of the appearance of the inscription "no signal". Tricolor TV will now only give you pleasure, because you can watch interesting TV shows.